A Super Inversion is Over Western Washington

This morning, temperatures were in the lower to mid-40s over much of western Washington; but ascend  to 1500 ft and mid to upper 60s are occurring.  Huge increase of temperature with height....a super inversion.

Below the inversion, the air has become saturated, with lots of fog.   The view from the Seattle SpaceNeedle panocam shows a dramatic, and very beautiful, scene:

But the surface view from North Seattle is one of fairly dense fog.

How strong is the inversion?  Let me tell you...and be prepared to be impressed. 

Here are the temperatures above north Seattle from the regional profiler, a sophisticated device that can measure temperature aloft by tracking sound waves (the speed of sound depends on temperature).    Temperatures are in C and range from 10C (50F) to about 22C (72F), 700 meters above the surface.  Most of the change is in the lower 300 meters (about 1000 ft)

The radiosonde-based temperature profile at Quillayute on the Washington coast shows a similar structure (red line below), with about a 17C (30F) increase in temperature within a very thin layer near the surface.  The blue dashed line is dew point...indicating saturation near the surface (with fog)--the temperature and dew point are the same.  But aloft, the temperature and dew point separate, indicating very dry air aloft.  Dry and warm.

 Why such a super inversion?     We start with a big ridge of high pressure overhead (see upper level map for 5 AM this morning).

As a result, there are virtually no clouds aloft, which allows the surface to radiate infrared energy to space, causing surface cooling.  Nights are long now--also good for cooling!

But there is more.  A big high pressure area is associated with sinking air aloft, but less sinking near the surface (air can't pass through the surface).    Sinking causes air to be compressed (pressure increases towards the ground) and compressing air warms it up (think about how warm your bike pump is after use).

So with more sinking aloft than at the surface, the high is preferentially warming aloft compared to the surface---this helps build the inversion.

And if you like subtleties there is more.  At the surface, the highest pressures of the region are east of the Cascades, causing some easterly flow aloft. 

To show this, here are the winds and temperatures above Sea Tac Airport for the past day (time increases to the left, height is in pressure, 850=5000ft).   The wind barbs show easterly flow (from the east), which descends over the western slopes of the Cascades producing MORE compressional warming aloft. 

Good for the inversion.  In fact, look at the temperatures on the chart...there is a big increase from the surface to roughly 930 hPa pressure (about 800 meters above sea level.)

The fog will burn out in a few hours and warmer air should mix down to the surface, giving a fine day in the 60s. 

But if you can't wait to warm up, put on your hiking shoes and head up a local foothill.  You will start with a jacket and end up in a tee shirt...guaranteed.

from Cliff Mass Weather and Climate Blog http://ift.tt/2xvtfAq

A Super Inversion is Over Western Washington

This morning, temperatures were in the lower to mid-40s over much of western Washington; but ascend  to 1500 ft and mid to upper 60s are occurring.  Huge increase of temperature with height....a super inversion.

Below the inversion, the air has become saturated, with lots of fog.   The view from the Seattle SpaceNeedle panocam shows a dramatic, and very beautiful, scene:

But the surface view from North Seattle is one of fairly dense fog.

How strong is the inversion?  Let me tell you...and be prepared to be impressed. 

Here are the temperatures above north Seattle from the regional profiler, a sophisticated device that can measure temperature aloft by tracking sound waves (the speed of sound depends on temperature).    Temperatures are in C and range from 10C (50F) to about 22C (72F), 700 meters above the surface.  Most of the change is in the lower 300 meters (about 1000 ft)

The radiosonde-based temperature profile at Quillayute on the Washington coast shows a similar structure (red line below), with about a 17C (30F) increase in temperature within a very thin layer near the surface.  The blue dashed line is dew point...indicating saturation near the surface (with fog)--the temperature and dew point are the same.  But aloft, the temperature and dew point separate, indicating very dry air aloft.  Dry and warm.

 Why such a super inversion?     We start with a big ridge of high pressure overhead (see upper level map for 5 AM this morning).

As a result, there are virtually no clouds aloft, which allows the surface to radiate infrared energy to space, causing surface cooling.  Nights are long now--also good for cooling!

But there is more.  A big high pressure area is associated with sinking air aloft, but less sinking near the surface (air can't pass through the surface).    Sinking causes air to be compressed (pressure increases towards the ground) and compressing air warms it up (think about how warm your bike pump is after use).

So with more sinking aloft than at the surface, the high is preferentially warming aloft compared to the surface---this helps build the inversion.

And if you like subtleties there is more.  At the surface, the highest pressures of the region are east of the Cascades, causing some easterly flow aloft. 

To show this, here are the winds and temperatures above Sea Tac Airport for the past day (time increases to the left, height is in pressure, 850=5000ft).   The wind barbs show easterly flow (from the east), which descends over the western slopes of the Cascades producing MORE compressional warming aloft. 

Good for the inversion.  In fact, look at the temperatures on the chart...there is a big increase from the surface to roughly 930 hPa pressure (about 800 meters above sea level.)

The fog will burn out in a few hours and warmer air should mix down to the surface, giving a fine day in the 60s. 

But if you can't wait to warm up, put on your hiking shoes and head up a local foothill.  You will start with a jacket and end up in a tee shirt...guaranteed.

from Cliff Mass Weather and Climate Blog http://ift.tt/2xvtfAq

Why Your House is Always Cold and What You Can Do About It

Although a cooler home might be beneficial in the summer months, come winter you will find yourself cursing the change in weather and wondering why your house is so cold. Trying to ward off bitter temperatures in your own home can get you down, but you don’t have to live this way.

If your house feels cold at night, and you can’t warm up even with the central heating on, you need to start investigating why that is. Not only does it feel uncomfortable to live in a cold home, but your energy bill will also suffer.

Perhaps your house is particularly old, and there are problems with the structure, or maybe you live in a modern build, and it's a case of making small changes that will improve your home's efficiency. Whatever the reason, here are some of the most common explanations for a cold home and what you can do to combat them.

There are Cracks and Gaps in Your Windows and Walls

About a third of a home’s heat loss is due to cracks and holes in windows and walls, with most of that heat loss occurring at night. Although windows help to bring natural light into a home, they can also drastically reduce the temperature in your home if you’re not careful.

What can you do about it? If you spot cracks in your windows and you can’t afford to replace them, you can increase the temperature inside your home by sealing and plugging gaps. If you find cracks at the window edges, seal them with latex or silicone caulk. Urethane foam, which is available in pressurized cans, can be used to fill the gaps. You can also apply weather stripping around the doors to plug the gaps, which will help retain the heat inside your home. You will be able to lengthen the life of your windows by maintaining them adequately, all though this is not a long-term solution.

Your Windows Need Replacing

If you live in an old house with sash windows, it’s likely that they are letting in drafts and expelling warm air from your heaters. Single-glazed panes are also notorious for letting out heat, while stained glass windows are just as inefficient.

What can you do about it? The obvious solution to this problem is to replace your windows, but due to issues with planning permission or budget restraints, this isn’t always possible. If you can’t replace your windows, there are cheaper alternatives that can make your home warmer and more energy efficient, such as insulating film, draft strips, curtains and drapes. If your purse strings are tight, you could cover the windowpanes with cling film or foil to retain more heat.

If your windows are old and you know they need replacing, contact a local company that can give you a competitive quote. Local businesses tend to offer the best prices as they rely on customers in the area. If you live in San Diego, for example, search online for replacement windows in San Diego and contact a local company.

Your Heaters Aren’t Working Efficiently

If you’re still shivering when the heating is turned on, the problem could be with your heating system rather than the structure of your home. Ineffective heating is easy to fix, however, so don’t be dismayed if this does turn out to be the issue. If you live in a rented property, it is your landlord’s responsibility to make sure the heating works, but if you own your home, you need to identify the route of the problem, and seek professional advice if needed.

What can you do about it? First, you need to check the heating system for each room. Check that your heat register is open, or you may have purposefully closed it as you don’t want to heat an unused room, make sure that the return air duct is sealed too. You could unintentionally be increasing the cold air infiltration to the room, and cost you more than you thought that you were saving. You also need to consider the impact on your furnace from closing off too many rooms in an effort to keep the rest of the house warm. It will be working overtime to try and distribute the heat. A closed heat vent can also mean that the return air duct sucks in the cold air from outside through ineffective windows or from under doors; or if the ducts haven’t been sealed properly the extra pressure from the closed off vents can force as much as 15% of heat into basements or floor cavities. It is best to seek advice from a local HVAC contractor because the modern systems are typically finely balanced.

There Are Multiple Small Drafts In Your Home

If your home feels drafty and cold, it’s a good idea to look out for small areas where cold air can get through, such as through letterplates and under doors. It may not seem like much, but those areas can let in drafts and reduce the overall temperature of your home, even when you’ve got the heating on.

What can you do about it? You will need to identify these weak spots in your home and target them one by one. Many people use draft excluders for their doors and seal their windows to prevent heat leaving the building. If you have a letterplate, you should replace it with one that has an internal draft excluder as these can allow a lot of heat to escape from your home.

If your house is poorly insulated, you could cover your entire door and the surrounding wall with a door curtain, which will dramatically reduce the heat loss.

Your Furniture Is In The Wrong Place

As well as making structural changes and checking your furnace is working properly, it’s important to address the location of the furniture in your home. Many people make the mistake of situating chairs, sofas and beds near windows because they enjoy the views, without realizing they would be a lot warmer if they sat somewhere else.

What can you do about it? If you want to maximize the energy efficiency of your home, you’ll need to get smart about where to put your furniture. Position chairs closer to the center of a room or beside an internal wall so that you feel warmer when sitting. If your desk is up against an external wall and you don’t want to move it, you could consider using a thick sheet or tapestry to cover the wall, or else you could insulate it using a cardboard alternative.

Consider investing in a fabulous screen to shield yourself from the drafts. There’s a reason why these were so popular with our ancestors, and that’s because they didn’t have efficient heating systems - not just because they were fashionable. For maximum effect, use it between you and the draught, and not between you and your heat source.

Your Floors Aren’t Insulated
If it isn’t properly insulated, your floor could be to blame for 10% of the heat loss from your home, especially if you have wooden floors rather than carpet. The tiled floors in your kitchen and bathroom can also cause heat loss, not to mention it feels cold on your feet.

What can you do about it? If your budget extends to an underfloor heating system or floor insulation, these are the most efficient options for retaining heat in your home. However, if you rent your home or you cannot afford the expense of having your floor insulated or putting down a carpet, there are numerous cheaper options you can try.

Rugs are efficient at retaining the heat in your home, plus they look great on wooden floors and will be more comfortable on your feet. You might also want to check for gaps in your floorboards and skirting boards, as these can be responsible for letting out a lot of heat. You can use a silicone-based filler to plug the gaps.

Your Roof Is the Problem
If you’ve tried all of the above to no avail, then your roof could be the culprit. A poorly insulated roof can account for a quarter of all heat loss in a home, and if your building pre-dates 1995, you’re likely to need an upgrade.

What can you do about it? Consider an insulation solution for your roof or attic, and don’t scrimp in this area. Instead of trying to fix the problem yourself, call out an expert to do a proper inspection and suggest the best solution for your home. Different types of roof require different insulation materials and techniques, so it’s a good idea to get professional advice before making any changes.

Get to the Root of the Problem
No matter how good your heating system is, if there are gaps, cracks or structural problems in your home, you will lose most of this heat and spend the winter trying to warm your home. You may need to do a full investigation to identify the source of the problem, but once you know where you’re losing heat, there are various steps you can take to improve your home’s efficiency.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2zdOATm

Why Your House is Always Cold and What You Can Do About It

Although a cooler home might be beneficial in the summer months, come winter you will find yourself cursing the change in weather and wondering why your house is so cold. Trying to ward off bitter temperatures in your own home can get you down, but you don’t have to live this way.

If your house feels cold at night, and you can’t warm up even with the central heating on, you need to start investigating why that is. Not only does it feel uncomfortable to live in a cold home, but your energy bill will also suffer.

Perhaps your house is particularly old, and there are problems with the structure, or maybe you live in a modern build, and it's a case of making small changes that will improve your home's efficiency. Whatever the reason, here are some of the most common explanations for a cold home and what you can do to combat them.

There are Cracks and Gaps in Your Windows and Walls

About a third of a home’s heat loss is due to cracks and holes in windows and walls, with most of that heat loss occurring at night. Although windows help to bring natural light into a home, they can also drastically reduce the temperature in your home if you’re not careful.

What can you do about it? If you spot cracks in your windows and you can’t afford to replace them, you can increase the temperature inside your home by sealing and plugging gaps. If you find cracks at the window edges, seal them with latex or silicone caulk. Urethane foam, which is available in pressurized cans, can be used to fill the gaps. You can also apply weather stripping around the doors to plug the gaps, which will help retain the heat inside your home. You will be able to lengthen the life of your windows by maintaining them adequately, all though this is not a long-term solution.

Your Windows Need Replacing

If you live in an old house with sash windows, it’s likely that they are letting in drafts and expelling warm air from your heaters. Single-glazed panes are also notorious for letting out heat, while stained glass windows are just as inefficient.

What can you do about it? The obvious solution to this problem is to replace your windows, but due to issues with planning permission or budget restraints, this isn’t always possible. If you can’t replace your windows, there are cheaper alternatives that can make your home warmer and more energy efficient, such as insulating film, draft strips, curtains and drapes. If your purse strings are tight, you could cover the windowpanes with cling film or foil to retain more heat.

If your windows are old and you know they need replacing, contact a local company that can give you a competitive quote. Local businesses tend to offer the best prices as they rely on customers in the area. If you live in San Diego, for example, search online for replacement windows in San Diego and contact a local company.

Your Heaters Aren’t Working Efficiently

If you’re still shivering when the heating is turned on, the problem could be with your heating system rather than the structure of your home. Ineffective heating is easy to fix, however, so don’t be dismayed if this does turn out to be the issue. If you live in a rented property, it is your landlord’s responsibility to make sure the heating works, but if you own your home, you need to identify the route of the problem, and seek professional advice if needed.

What can you do about it? First, you need to check the heating system for each room. Check that your heat register is open, or you may have purposefully closed it as you don’t want to heat an unused room, make sure that the return air duct is sealed too. You could unintentionally be increasing the cold air infiltration to the room, and cost you more than you thought that you were saving. You also need to consider the impact on your furnace from closing off too many rooms in an effort to keep the rest of the house warm. It will be working overtime to try and distribute the heat. A closed heat vent can also mean that the return air duct sucks in the cold air from outside through ineffective windows or from under doors; or if the ducts haven’t been sealed properly the extra pressure from the closed off vents can force as much as 15% of heat into basements or floor cavities. It is best to seek advice from a local HVAC contractor because the modern systems are typically finely balanced.

There Are Multiple Small Drafts In Your Home

If your home feels drafty and cold, it’s a good idea to look out for small areas where cold air can get through, such as through letterplates and under doors. It may not seem like much, but those areas can let in drafts and reduce the overall temperature of your home, even when you’ve got the heating on.

What can you do about it? You will need to identify these weak spots in your home and target them one by one. Many people use draft excluders for their doors and seal their windows to prevent heat leaving the building. If you have a letterplate, you should replace it with one that has an internal draft excluder as these can allow a lot of heat to escape from your home.

If your house is poorly insulated, you could cover your entire door and the surrounding wall with a door curtain, which will dramatically reduce the heat loss.

Your Furniture Is In The Wrong Place

As well as making structural changes and checking your furnace is working properly, it’s important to address the location of the furniture in your home. Many people make the mistake of situating chairs, sofas and beds near windows because they enjoy the views, without realizing they would be a lot warmer if they sat somewhere else.

What can you do about it? If you want to maximize the energy efficiency of your home, you’ll need to get smart about where to put your furniture. Position chairs closer to the center of a room or beside an internal wall so that you feel warmer when sitting. If your desk is up against an external wall and you don’t want to move it, you could consider using a thick sheet or tapestry to cover the wall, or else you could insulate it using a cardboard alternative.

Consider investing in a fabulous screen to shield yourself from the drafts. There’s a reason why these were so popular with our ancestors, and that’s because they didn’t have efficient heating systems - not just because they were fashionable. For maximum effect, use it between you and the draught, and not between you and your heat source.

Your Floors Aren’t Insulated
If it isn’t properly insulated, your floor could be to blame for 10% of the heat loss from your home, especially if you have wooden floors rather than carpet. The tiled floors in your kitchen and bathroom can also cause heat loss, not to mention it feels cold on your feet.

What can you do about it? If your budget extends to an underfloor heating system or floor insulation, these are the most efficient options for retaining heat in your home. However, if you rent your home or you cannot afford the expense of having your floor insulated or putting down a carpet, there are numerous cheaper options you can try.

Rugs are efficient at retaining the heat in your home, plus they look great on wooden floors and will be more comfortable on your feet. You might also want to check for gaps in your floorboards and skirting boards, as these can be responsible for letting out a lot of heat. You can use a silicone-based filler to plug the gaps.

Your Roof Is the Problem
If you’ve tried all of the above to no avail, then your roof could be the culprit. A poorly insulated roof can account for a quarter of all heat loss in a home, and if your building pre-dates 1995, you’re likely to need an upgrade.

What can you do about it? Consider an insulation solution for your roof or attic, and don’t scrimp in this area. Instead of trying to fix the problem yourself, call out an expert to do a proper inspection and suggest the best solution for your home. Different types of roof require different insulation materials and techniques, so it’s a good idea to get professional advice before making any changes.

Get to the Root of the Problem
No matter how good your heating system is, if there are gaps, cracks or structural problems in your home, you will lose most of this heat and spend the winter trying to warm your home. You may need to do a full investigation to identify the source of the problem, but once you know where you’re losing heat, there are various steps you can take to improve your home’s efficiency.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2zdOATm

High Pressure Dominates the Region

There will be no precipitation for the rest of the month over our region. None.

The reason?   A strong area of high pressure that has built in across the area, and one that will remain in place through the middle of next week.

Let's start with the upper level (500 hPa, about 18,000 ft) map for 5 AM Friday.  HUGE ridge over the U.S. West Coast. The problem with having high pressure over us during fall, is that it promotes low clouds and fog...like we had today.

The ridge will stay strong all day Friday and then weaken a bit on Saturday, as a weak disturbance passes to our north (illustrated by the upper level map at 11 AM Saturday).

The ridges strengthens, but shifts westward on Monday, shunting Pacific storms way to the north.  With the ridge to the NW of us, cooler, but still dry weather will be the rule.  Less fog.

On Tuesday, the ridge is still strong, but closer to us.

The bottom line is that we have a week of dry weather ahead, with initially warmer than normal temperatures (mid-60s Friday and Saturday), dropping into the upper 50s by early next week.  Perfect fall weather.

Have you noticed that the leaf colors have been particularly good this year? What I have read is that warm days and cool nights in late summer and early fall is good for fall color.   Taking a look at the temperatures at Sea-Tac for the past 12 weeks (below), we have had a number of warm days, with typically cool nights.  Plenty of sun, which supposedly is good for color.

 Enjoy the weekend...a beautiful one to get out.

from Cliff Mass Weather and Climate Blog http://ift.tt/2yTW4df

High Pressure Dominates the Region

There will be no precipitation for the rest of the month over our region. None.

The reason?   A strong area of high pressure that has built in across the area, and one that will remain in place through the middle of next week.

Let's start with the upper level (500 hPa, about 18,000 ft) map for 5 AM Friday.  HUGE ridge over the U.S. West Coast. The problem with having high pressure over us during fall, is that it promotes low clouds and fog...like we had today.

The ridge will stay strong all day Friday and then weaken a bit on Saturday, as a weak disturbance passes to our north (illustrated by the upper level map at 11 AM Saturday).

The ridges strengthens, but shifts westward on Monday, shunting Pacific storms way to the north.  With the ridge to the NW of us, cooler, but still dry weather will be the rule.  Less fog.

On Tuesday, the ridge is still strong, but closer to us.

The bottom line is that we have a week of dry weather ahead, with initially warmer than normal temperatures (mid-60s Friday and Saturday), dropping into the upper 50s by early next week.  Perfect fall weather.

Have you noticed that the leaf colors have been particularly good this year? What I have read is that warm days and cool nights in late summer and early fall is good for fall color.   Taking a look at the temperatures at Sea-Tac for the past 12 weeks (below), we have had a number of warm days, with typically cool nights.  Plenty of sun, which supposedly is good for color.

 Enjoy the weekend...a beautiful one to get out.

from Cliff Mass Weather and Climate Blog http://ift.tt/2yTW4df

The Number One Thing That People Look For In A New House

Everybody has different priorities when they’re moving house. Some people are just looking for more space while others want a better neighborhood or to be closer to shops. Have you ever wondered how close your list of must-haves is to everybody else? These are the things that most people look for first when choosing a new house.

Being Close To Family

Being close to family is fairly high on people’s list of priorities but not as high as you might think. Moving somewhere close to where they already are is a plus for some people because they can use local movers and they’ve got family and friends nearby to help them out with the move. A lot of the time it depends on your family dynamic, some families are closer than others so it’ll be more of a consideration for them. However, it doesn’t affect people’s decision nearly as much as the rest of these factors.

Strong Broadband Signal

It’s no surprise that a good broadband signal is a deal breaker for a lot of people. Working from home is becoming more popular so people need to have a good internet connection for that, but more generally, everybody uses it for streaming TV shows and movies or reading the news or whatever else. When you’ve got a reliance on multiple devices connected to the internet, a bad signal is going to cause you some trouble. That’s why around 10 percent of people say that strong broadband signal is one of the most important things.

Close To Shops

Being near to shops and other amenities is important to a lot of people, but it’s still surprisingly low. Only 15 percent of people say that it’s near the top of the list and they would actually pay around $10,110 more for a house that’s closer. The rest of the people surveyed said that they wouldn’t. Perhaps it’s because of an increase in online shopping or maybe people just don’t mind driving a bit if they can pay less for the house.

A Good Garden 

Around 12 percent of people said that having a decent garden was the most important thing that they look for in a house. More importantly, they want a south facing garden so they get a good amount of sun. That was actually more important than the size of the garden to most people which makes sense I suppose, there’s no point having a big garden if it isn’t getting that much sun. 17 percent of people said that being near a park or green space was a priority if they couldn’t get a good garden.

Being Close To Work

Top of the list is being close to work, around a third of people said that’s the main thing that they’re looking for when deciding on a new house. Just under a third also cited access to public transport as a priority so it appears that getting to and from their job is the most important thing in people’s lives.

Also featuring highly on the list was proximity to good schools and having a good parking space.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2gBmt5b

How to inject some style into your bedroom

When it comes to creating a modern and practical sleeping space, you don’t need to spend a fortune on following the latest trend or an over the top color scheme. Remember that primarily your bedroom is a place to relax and unwind in, not to mention that you use it for sleeping, so make sure that the space reflects your personality and makes you feel comfortable. If you get this balance right, you will be rewarded with a room that is both modern and minimalistic. So if you are looking for inspiration, or are unsure to know where is a good place to start, then check out these tips to find out how to inject some much-needed style into one of the most important rooms of the house.

Simple elegance

When it comes to your bedroom, forget fancy wallpaper; all you need is few coats of a neutral color paint to give your room a simple and modern look and feel. You want to keep your bedroom light and fresh, and it should be both welcoming and airy for yourself and your partner. Neutral paints are an ideal choice for homeowners who are looking to create a space that is both modern yet inviting. From pale grays or cream tones, use these colors sparingly to create a look that is both relaxing and effortlessly chic.

Complementary accessories

Unlike in other rooms of your house or apartment, your bedroom should be kept free from clutter and unnecessary accessories – as this can create a sense of misbalance. You may also want to consider the furniture that you have in your bedroom currently – are you sleeping well? Does it provide your back with adequate support? If you are looking to replace your old bedroom furniture for a more contemporary look and feel, Modern Digs bedroom suites offer a range of elegant and practical options for your boudoir. You should also limit the amount of gadgets in technology that is on show in your room too – as this can disrupt sleep patterns. Once you have sorted these principal elements, now’s the time to consider adding a few complementary accessories such as candles, soft throws and a few scattered cushions to provide an element of luxury to your space. Now you can lie back, relax and enjoy your stylish and comfortable room.

Lighting

Last but not least, it’s essential that you have the right lighting in your bedroom. Soft, subtle tones will make your room a space in which you want to unwind and spend time hidden away from the hustle and bustle of daily life, while harsh lighting or using a light bulb that is too dark will make your space feel threatening and unwelcoming. Consider changing your overhead bulbs for an energy saving option, and choose lamps that offer warmer shades of light.

Making a few small changes to your color scheme, lighting and accessories can inject some much-needed style and elegance into one of the most important rooms of your house. So why not give your bedroom a much-needed makeover?

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2gBmqq1

The Number One Thing That People Look For In A New House

Everybody has different priorities when they’re moving house. Some people are just looking for more space while others want a better neighborhood or to be closer to shops. Have you ever wondered how close your list of must-haves is to everybody else? These are the things that most people look for first when choosing a new house.

Being Close To Family

Being close to family is fairly high on people’s list of priorities but not as high as you might think. Moving somewhere close to where they already are is a plus for some people because they can use local movers and they’ve got family and friends nearby to help them out with the move. A lot of the time it depends on your family dynamic, some families are closer than others so it’ll be more of a consideration for them. However, it doesn’t affect people’s decision nearly as much as the rest of these factors.

Strong Broadband Signal

It’s no surprise that a good broadband signal is a deal breaker for a lot of people. Working from home is becoming more popular so people need to have a good internet connection for that, but more generally, everybody uses it for streaming TV shows and movies or reading the news or whatever else. When you’ve got a reliance on multiple devices connected to the internet, a bad signal is going to cause you some trouble. That’s why around 10 percent of people say that strong broadband signal is one of the most important things.

Close To Shops

Being near to shops and other amenities is important to a lot of people, but it’s still surprisingly low. Only 15 percent of people say that it’s near the top of the list and they would actually pay around $10,110 more for a house that’s closer. The rest of the people surveyed said that they wouldn’t. Perhaps it’s because of an increase in online shopping or maybe people just don’t mind driving a bit if they can pay less for the house.

A Good Garden 

Around 12 percent of people said that having a decent garden was the most important thing that they look for in a house. More importantly, they want a south facing garden so they get a good amount of sun. That was actually more important than the size of the garden to most people which makes sense I suppose, there’s no point having a big garden if it isn’t getting that much sun. 17 percent of people said that being near a park or green space was a priority if they couldn’t get a good garden.

Being Close To Work

Top of the list is being close to work, around a third of people said that’s the main thing that they’re looking for when deciding on a new house. Just under a third also cited access to public transport as a priority so it appears that getting to and from their job is the most important thing in people’s lives.

Also featuring highly on the list was proximity to good schools and having a good parking space.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2gBmt5b

How to inject some style into your bedroom

When it comes to creating a modern and practical sleeping space, you don’t need to spend a fortune on following the latest trend or an over the top color scheme. Remember that primarily your bedroom is a place to relax and unwind in, not to mention that you use it for sleeping, so make sure that the space reflects your personality and makes you feel comfortable. If you get this balance right, you will be rewarded with a room that is both modern and minimalistic. So if you are looking for inspiration, or are unsure to know where is a good place to start, then check out these tips to find out how to inject some much-needed style into one of the most important rooms of the house.

Simple elegance

When it comes to your bedroom, forget fancy wallpaper; all you need is few coats of a neutral color paint to give your room a simple and modern look and feel. You want to keep your bedroom light and fresh, and it should be both welcoming and airy for yourself and your partner. Neutral paints are an ideal choice for homeowners who are looking to create a space that is both modern yet inviting. From pale grays or cream tones, use these colors sparingly to create a look that is both relaxing and effortlessly chic.

Complementary accessories

Unlike in other rooms of your house or apartment, your bedroom should be kept free from clutter and unnecessary accessories – as this can create a sense of misbalance. You may also want to consider the furniture that you have in your bedroom currently – are you sleeping well? Does it provide your back with adequate support? If you are looking to replace your old bedroom furniture for a more contemporary look and feel, Modern Digs bedroom suites offer a range of elegant and practical options for your boudoir. You should also limit the amount of gadgets in technology that is on show in your room too – as this can disrupt sleep patterns. Once you have sorted these principal elements, now’s the time to consider adding a few complementary accessories such as candles, soft throws and a few scattered cushions to provide an element of luxury to your space. Now you can lie back, relax and enjoy your stylish and comfortable room.

Lighting

Last but not least, it’s essential that you have the right lighting in your bedroom. Soft, subtle tones will make your room a space in which you want to unwind and spend time hidden away from the hustle and bustle of daily life, while harsh lighting or using a light bulb that is too dark will make your space feel threatening and unwelcoming. Consider changing your overhead bulbs for an energy saving option, and choose lamps that offer warmer shades of light.

Making a few small changes to your color scheme, lighting and accessories can inject some much-needed style and elegance into one of the most important rooms of your house. So why not give your bedroom a much-needed makeover?

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2gBmqq1

4 Tips for Anyone Looking to Invest in Property

Buying property of your own is a big undertaking. You have to be in the right place in your life and have the money to invest. There are a lot of options out there, which makes it an overwhelming process for some people.

Take your time and don’t jump into any rash decisions. Rushing a deal may leave you with regrets down the road. Don’t let your excitement get in the way of analyzing the details and crunching the numbers. Be smart and get help from experts or those who’ve been through the process before. See these tips for anyone looking to invest in property.

Do Your Homework

It’s important to study what’s out there and have an idea of the market before moving forward on a purchase. Take advantage of resources and scour websites for answers. Search 1031 exchange properties for sale and use the website to view property details and pricing. This will give you a better idea of what you can afford. They can provide you with access to national contacts that they’ve vetted throughout the industry and with some of the largest buyers of commercial real estate in the country.

Find the Right Location

Consider location when you’re searching for an ideal property. Don’t let a low price draw you in and forget that you care about where it’s located. You want to get a prime spot that’s going to be easy to fill with tenants or rent out for a retail store. A neighborhood with low crime rates and low property taxes is ideal. Think about if you want your structure in an up-and-coming neighborhood that has good restaurants and schools. Don’t guess, but research and find specific answers to your concerns.

Fix It Up

If you purchase a building that’s rundown or unattractive, you’re going to want to spruce it up with appealing designs and décor. Hire a contractor and interior designer to help you if you aren’t skilled in those areas. You want your building to be viewed as striking and clean. Think about how much work you’re going to have to put into it before finalizing the paperwork. If you’re handy, that helps lower costs, but if you’re going to have to hire a bunch of people to help you, then make sure you budget for these expenses.

Fill the Space

Once you’ve made the purchase, decide how you’re going to fill the space. Consider if you’ll rent it out and what kind of business you’ll do. Keep up with maintenance to save yourself big headaches down the road. Avoid tenant turnover by keeping them happy so they enjoy renting from you. Have strict procedures in place to screen tenants and weed out the less reliable ones. Hire a property manager to help you with certain duties and pay your taxes on time.

Conclusion

The bottom line is to keep your expectations realistic and head on straight. If you’re not ready to make your first purchase, then work with a trusted partner who can guide you. These are tips for anyone looking to invest in property.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2itxNog

What Your Home Is Missing

Your home is special to you and you take pride in the effort you put in each day. It’s likely that you work really hard to upkeep it and make it look nice because you care. That doesn’t mean you’re perfect, because no one is.

There are a few aspects that your home should have to bring it to another level. Don’t be afraid to go outside of your comfort zone and adapt changes that’ll spruce up your house even more. You may not even know what’s missing because you haven’t done enough research to see what other homeowners are installing and improving upon. See what your home is missing.

Color

Spice up your space by adding color to your home, both inside and outside. Color will liven up your home and instantly catch your eye when you enter the house. It’s the same challenge you find when trying to build a wardrobe that isn’t all black and white. Hang colorful paintings, place pillows and paint your walls. Don’t be afraid to have the room come alive and express character to the observer. Take inventory on each of your rooms and make note of where it’s possible to include more color.

Look of Luxury

Luxury is a sense of style, it doesn’t mean you have to spend a fortune. Be mindful of the colors and textures you use to make your home look more expensive. Purchase light fixtures and furniture that resemble pricy items. It’s all about your presentation and how you decorate your home. Hang your curtains high, throw down area rugs and switch out lamp shades. Use matching containers for storage and replace old hardware. Get creative and shop around, instead of breaking the bank with expensive items that you don’t need.

Swimming Pool

What you’re missing is a swimming pool. Search around to buy florida homes, because they probably come with a pool. Houses in warmer climates get more use out of a swimming pool and you’ll probably enjoy living in warmer temperatures. If you’re not ready to move, then install a swimming pool in your backyard. It’ll be fun to have when you’re entertaining or wanting to cool off on hot summer day. Take care of it and learn how to properly clean your pool to keep it looking nice and brand new.

Kitchen & Bath Updates

If you have old bathrooms and an old kitchen, it’s time to enhance their appearance with upgrades. Updating your kitchen and baths isn’t only nice for your sake, but will help you sell your home faster once you have it on the market. These are projects that’ll give you a return on your investment and make the time and money spent well worth it. Do your research and find examples of homes that resemble the look you’re going for, so you can show your designer.

Conclusion

Your job’s never done when decorating a house. You’re always changing, updating and rearranging to make it look right. This is what your home is missing.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2z1h3LV

How to Replace Old Tiles in Your Home

Tiles can be one of the most durable kinds of flooring. They last for years and are easy to clean. But if you find yourself at the point that the tiling in your home could use a facelift, luckily replacing them is simple enough that you can do it on your own. So whether you’re looking to replace a beat-up floor, change the pattern, or just want to try new flooring, we’ve put together an easy step-by-step guide to get you on the right track.

Tools and Materials

Before you get started tearing up your floor, it is important to make sure that you have all the necessary tools to complete the task. Doing this will ensure that you don’t get halfway through and then realize you have to run to the store to pick up more materials. You are going to want:

- A scoring tool          
- Tile spacers
- Grout saw
- Metal straightedge
- Level
- Hammer
- Trowel
- Grout bag
- Grout
- Safety glasses
- Mortar
- Tile clippers

Finally, you need the ceramic tiles you will be laying. If you are covering a large area, it is a good idea to look into purchasing wholesale tiles. It might be the best value for your project. Once you have all the necessary materials, you can finally begin.

Replacing Your Tile Flooring

Step 1: Clearing the Room 
Make sure that you empty the room of any furniture that might get in the way of your project. This also includes lamps and even shelves on the walls that restrict your movement. If you're going to be working around a sink or toilet, the water to your house should be turned off before removing these fixtures.

Step 2: Removing Tiles
Once it’s cleared, you can start tearing up the tiles. This is the easy part of the job. If none are broken lightly hit one with a hammer by a wall to start lifting them. Be careful of any sharp edges.

Step 3: Prepping the Underlayment
Once all the tiles are off the floor and disposed of, it’s time to access the underlayment. This is a sheet of plywood that is commonly placed underneath tiling. Occasionally tiles are attached directly to a concrete floor, but this is rare. If the underlayment is damaged it needs to be replaced before continuing on. If it is in good condition, it’s time to clear off any debris. Sweep thoroughly for dirt and small tile pieces. You also should remove any extra nails that you come across.

Step 4: Prepping for the Tiles
Once you're sure that the floor is in good condition, mix thin set mortar in a bucket to the recommendations of the brand. Create reference points before spreading the mortar with the thin side of the trowel in 3ft x 3ft patches. Then comb the mortar with the toothed side of the trowel to ensure an even application. Any excess can be removed and re-added to the bucket.

Step 5: Laying the Tiles
Use your references when lying the first tile, often along a wall or in the corner of the room is best. Pressing the tiles and gently twisting them ensure the best set. Place a tile spacer at the edges of the first tile and lay the second one next to it. Continue on like this. Upon finishing a section use a level and rubber mallet to level the tiles.

Step 6: Continuing 
Gently remove any excess mortar you find. Make adjustments as you go to ensure that the tiles are straight.

Step 7: Cutting Tiles
In tight corners or rooms that are not true rectangles, it will be necessary to cut tiles to make them fit. It these cases make a mark of the line on the tile and then make a relief cut along that line. Break off the pieces with tile clippers before smoothing down the edges with aluminium sandpaper. At this point, you lay the tiles just like the rest.

Step 8: Filling the spaces
Once all the tiles are down, let it sit undisturbed for 24 hours. After this time has elapsed you can mix the grout according to the manufacturer’s instructions. Remove the tile spacers before applying the grout in the spaces between the tiles. Remove as much excess as possible and then let it dry for 20 minutes. At this point you can use a sponge to clean the grout off of the tiles. It takes around 72 hours for the grout to be fully set. After three weeks you can also seal it for more protection.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2itxCt6

4 Tips for Anyone Looking to Invest in Property

Buying property of your own is a big undertaking. You have to be in the right place in your life and have the money to invest. There are a lot of options out there, which makes it an overwhelming process for some people.

Take your time and don’t jump into any rash decisions. Rushing a deal may leave you with regrets down the road. Don’t let your excitement get in the way of analyzing the details and crunching the numbers. Be smart and get help from experts or those who’ve been through the process before. See these tips for anyone looking to invest in property.

Do Your Homework

It’s important to study what’s out there and have an idea of the market before moving forward on a purchase. Take advantage of resources and scour websites for answers. Search 1031 exchange properties for sale and use the website to view property details and pricing. This will give you a better idea of what you can afford. They can provide you with access to national contacts that they’ve vetted throughout the industry and with some of the largest buyers of commercial real estate in the country.

Find the Right Location

Consider location when you’re searching for an ideal property. Don’t let a low price draw you in and forget that you care about where it’s located. You want to get a prime spot that’s going to be easy to fill with tenants or rent out for a retail store. A neighborhood with low crime rates and low property taxes is ideal. Think about if you want your structure in an up-and-coming neighborhood that has good restaurants and schools. Don’t guess, but research and find specific answers to your concerns.

Fix It Up

If you purchase a building that’s rundown or unattractive, you’re going to want to spruce it up with appealing designs and décor. Hire a contractor and interior designer to help you if you aren’t skilled in those areas. You want your building to be viewed as striking and clean. Think about how much work you’re going to have to put into it before finalizing the paperwork. If you’re handy, that helps lower costs, but if you’re going to have to hire a bunch of people to help you, then make sure you budget for these expenses.

Fill the Space

Once you’ve made the purchase, decide how you’re going to fill the space. Consider if you’ll rent it out and what kind of business you’ll do. Keep up with maintenance to save yourself big headaches down the road. Avoid tenant turnover by keeping them happy so they enjoy renting from you. Have strict procedures in place to screen tenants and weed out the less reliable ones. Hire a property manager to help you with certain duties and pay your taxes on time.

Conclusion

The bottom line is to keep your expectations realistic and head on straight. If you’re not ready to make your first purchase, then work with a trusted partner who can guide you. These are tips for anyone looking to invest in property.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2itxNog

What Your Home Is Missing

Your home is special to you and you take pride in the effort you put in each day. It’s likely that you work really hard to upkeep it and make it look nice because you care. That doesn’t mean you’re perfect, because no one is.

There are a few aspects that your home should have to bring it to another level. Don’t be afraid to go outside of your comfort zone and adapt changes that’ll spruce up your house even more. You may not even know what’s missing because you haven’t done enough research to see what other homeowners are installing and improving upon. See what your home is missing.

Color

Spice up your space by adding color to your home, both inside and outside. Color will liven up your home and instantly catch your eye when you enter the house. It’s the same challenge you find when trying to build a wardrobe that isn’t all black and white. Hang colorful paintings, place pillows and paint your walls. Don’t be afraid to have the room come alive and express character to the observer. Take inventory on each of your rooms and make note of where it’s possible to include more color.

Look of Luxury

Luxury is a sense of style, it doesn’t mean you have to spend a fortune. Be mindful of the colors and textures you use to make your home look more expensive. Purchase light fixtures and furniture that resemble pricy items. It’s all about your presentation and how you decorate your home. Hang your curtains high, throw down area rugs and switch out lamp shades. Use matching containers for storage and replace old hardware. Get creative and shop around, instead of breaking the bank with expensive items that you don’t need.

Swimming Pool

What you’re missing is a swimming pool. Search around to buy florida homes, because they probably come with a pool. Houses in warmer climates get more use out of a swimming pool and you’ll probably enjoy living in warmer temperatures. If you’re not ready to move, then install a swimming pool in your backyard. It’ll be fun to have when you’re entertaining or wanting to cool off on hot summer day. Take care of it and learn how to properly clean your pool to keep it looking nice and brand new.

Kitchen & Bath Updates

If you have old bathrooms and an old kitchen, it’s time to enhance their appearance with upgrades. Updating your kitchen and baths isn’t only nice for your sake, but will help you sell your home faster once you have it on the market. These are projects that’ll give you a return on your investment and make the time and money spent well worth it. Do your research and find examples of homes that resemble the look you’re going for, so you can show your designer.

Conclusion

Your job’s never done when decorating a house. You’re always changing, updating and rearranging to make it look right. This is what your home is missing.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2z1h3LV

How to Replace Old Tiles in Your Home

Tiles can be one of the most durable kinds of flooring. They last for years and are easy to clean. But if you find yourself at the point that the tiling in your home could use a facelift, luckily replacing them is simple enough that you can do it on your own. So whether you’re looking to replace a beat-up floor, change the pattern, or just want to try new flooring, we’ve put together an easy step-by-step guide to get you on the right track.

Tools and Materials

Before you get started tearing up your floor, it is important to make sure that you have all the necessary tools to complete the task. Doing this will ensure that you don’t get halfway through and then realize you have to run to the store to pick up more materials. You are going to want:

- A scoring tool          
- Tile spacers
- Grout saw
- Metal straightedge
- Level
- Hammer
- Trowel
- Grout bag
- Grout
- Safety glasses
- Mortar
- Tile clippers

Finally, you need the ceramic tiles you will be laying. If you are covering a large area, it is a good idea to look into purchasing wholesale tiles. It might be the best value for your project. Once you have all the necessary materials, you can finally begin.

Replacing Your Tile Flooring

Step 1: Clearing the Room 
Make sure that you empty the room of any furniture that might get in the way of your project. This also includes lamps and even shelves on the walls that restrict your movement. If you're going to be working around a sink or toilet, the water to your house should be turned off before removing these fixtures.

Step 2: Removing Tiles
Once it’s cleared, you can start tearing up the tiles. This is the easy part of the job. If none are broken lightly hit one with a hammer by a wall to start lifting them. Be careful of any sharp edges.

Step 3: Prepping the Underlayment
Once all the tiles are off the floor and disposed of, it’s time to access the underlayment. This is a sheet of plywood that is commonly placed underneath tiling. Occasionally tiles are attached directly to a concrete floor, but this is rare. If the underlayment is damaged it needs to be replaced before continuing on. If it is in good condition, it’s time to clear off any debris. Sweep thoroughly for dirt and small tile pieces. You also should remove any extra nails that you come across.

Step 4: Prepping for the Tiles
Once you're sure that the floor is in good condition, mix thin set mortar in a bucket to the recommendations of the brand. Create reference points before spreading the mortar with the thin side of the trowel in 3ft x 3ft patches. Then comb the mortar with the toothed side of the trowel to ensure an even application. Any excess can be removed and re-added to the bucket.

Step 5: Laying the Tiles
Use your references when lying the first tile, often along a wall or in the corner of the room is best. Pressing the tiles and gently twisting them ensure the best set. Place a tile spacer at the edges of the first tile and lay the second one next to it. Continue on like this. Upon finishing a section use a level and rubber mallet to level the tiles.

Step 6: Continuing 
Gently remove any excess mortar you find. Make adjustments as you go to ensure that the tiles are straight.

Step 7: Cutting Tiles
In tight corners or rooms that are not true rectangles, it will be necessary to cut tiles to make them fit. It these cases make a mark of the line on the tile and then make a relief cut along that line. Break off the pieces with tile clippers before smoothing down the edges with aluminium sandpaper. At this point, you lay the tiles just like the rest.

Step 8: Filling the spaces
Once all the tiles are down, let it sit undisturbed for 24 hours. After this time has elapsed you can mix the grout according to the manufacturer’s instructions. Remove the tile spacers before applying the grout in the spaces between the tiles. Remove as much excess as possible and then let it dry for 20 minutes. At this point you can use a sponge to clean the grout off of the tiles. It takes around 72 hours for the grout to be fully set. After three weeks you can also seal it for more protection.

from Home Design Ideas | Interior Design Ideas And Architcture http://ift.tt/2itxCt6

Heavy Rain, Flooding Rivers, and Profound Rain Shadows

As advertised, a moderate atmospheric river event occurred on Saturday bringing heavy rain and limited flooding to our region. 

The water vapor satellite imagery at 5 PM yesterday said it all....a huge plume of moisture stretching back thousands of miles into the central Pacific. (this type of satellite imagery highlights water vapor content in the middle to upper troposphere).

The 24-h precipitation totals ending 7 AM Sunday were impressive (see image, click on it to enlarge), with over four inches on the SW side of the Olympics and the western slopes of the Cascades and 1-2 inches over the south Sound lowlands.   Look closely and you will see only about 1/4 inch fell around Port Townsend on the NE side of the Olympic Peninsula...the rain shadow in action.

 Even heavier rain fell over the coast mountains and Cascades of western Oregon, with several locations receiving over 6 inches in that 24-h period.  Roughly 2 inches in Portland.

If you really want to appreciate the rainshadow, here is the 24-hour precipitation total from Seattle RainWatch, which calibrates radar totals using rain gauges.  .1-.2 inches over southern Whidbey Island, with 4-5 inches southeast of Puget Sound over the western slopes of the Cascades.

Even though the region has been dry this summer, such heavy amounts quickly fill major rivers.  Thus, several of the rivers draining the western Cascades are now or soon will be in flood stage (red and blue dots)

To illustrate, the Snoqualme River, near the town of Snoqualmie, is now at moderate flood stage.  Fortunately, it should decline rapidly today.

A plot of the winds and temperatures above SEA-TAC Airport for the past day, shows the surge of warm, southwesterly flow late Saturday (red is temperature in C, wind barbs are shown, time is in UTC (Z, GMT) on the bottom and the y coordinate is height in pressure (850 hPa is about 5000 ft).  This morning the temperatures cooled and the winds turned more westerly aloft.

As a result of the westerly winds aloft, Seattle and much of Puget Sound is in the rain shadow of the Olympic Mountains today, with lots of sun.  In contrast, the western slopes of the Cascades and Olympics are getting hit with moderate showers (see radar below).

A nice day around Seattle and Portland today, even with some moist, unstable flow reaching our coast.  You get to appreciate the rain shadows around here.

from Cliff Mass Weather and Climate Blog http://ift.tt/2yC3bHs

Heavy Rain, Flooding Rivers, and Profound Rain Shadows

As advertised, a moderate atmospheric river event occurred on Saturday bringing heavy rain and limited flooding to our region. 

The water vapor satellite imagery at 5 PM yesterday said it all....a huge plume of moisture stretching back thousands of miles into the central Pacific. (this type of satellite imagery highlights water vapor content in the middle to upper troposphere).

The 24-h precipitation totals ending 7 AM Sunday were impressive (see image, click on it to enlarge), with over four inches on the SW side of the Olympics and the western slopes of the Cascades and 1-2 inches over the south Sound lowlands.   Look closely and you will see only about 1/4 inch fell around Port Townsend on the NE side of the Olympic Peninsula...the rain shadow in action.

 Even heavier rain fell over the coast mountains and Cascades of western Oregon, with several locations receiving over 6 inches in that 24-h period.  Roughly 2 inches in Portland.

If you really want to appreciate the rainshadow, here is the 24-hour precipitation total from Seattle RainWatch, which calibrates radar totals using rain gauges.  .1-.2 inches over southern Whidbey Island, with 4-5 inches southeast of Puget Sound over the western slopes of the Cascades.

Even though the region has been dry this summer, such heavy amounts quickly fill major rivers.  Thus, several of the rivers draining the western Cascades are now or soon will be in flood stage (red and blue dots)

To illustrate, the Snoqualme River, near the town of Snoqualmie, is now at moderate flood stage.  Fortunately, it should decline rapidly today.

A plot of the winds and temperatures above SEA-TAC Airport for the past day, shows the surge of warm, southwesterly flow late Saturday (red is temperature in C, wind barbs are shown, time is in UTC (Z, GMT) on the bottom and the y coordinate is height in pressure (850 hPa is about 5000 ft).  This morning the temperatures cooled and the winds turned more westerly aloft.

As a result of the westerly winds aloft, Seattle and much of Puget Sound is in the rain shadow of the Olympic Mountains today, with lots of sun.  In contrast, the western slopes of the Cascades and Olympics are getting hit with moderate showers (see radar below).

A nice day around Seattle and Portland today, even with some moist, unstable flow reaching our coast.  You get to appreciate the rain shadows around here.

from Cliff Mass Weather and Climate Blog http://ift.tt/2yC3bHs